Under the order, 28 days | Wholesale and Retail | Code: РММ-2-23-40-8-ПГУ-6
Stationary loading ramp РММ-2-23-40-8-ПГУ-6 Docker.
Type: for 3 semi-trailers.
Dimensions of the inclined part (WxL): 2490x7000 mm.
Dimensions of the horizontal platform (WxL): 2490x4000 mm (2pcs).
Dimensions of the hinged lip (WxL): 2000x600 mm.
Dimensions of the dock leveler (WxL): 1800x2000 mm.
The width of the passage: 2200 mm.
Flooring of stationary loading ramp: expanded metal sheet.
Flooring of entrance, hinged lips and dock leveler: corrugated sheet.
Working stroke: 1000-1500 mm.
Working stroke of dock leveler: +470 mm; -225 mm.
Loading capacity: 8000kg.
Loading capacity of dock leveler: 6000kg.
Device for unloading semi-trailers: hinged lips - 2pcs (frontal). Dock leveler - 1pc (lateral).
Protection: perimeter fences (removable).
Drive devices: Supporting screw jacks - stationary loading ramp. Hydraulic oil station - dock leveler.
Lifting system: manual 2-speed - stationary loading ramp. The control panel IP54 - dock leveler.
Drive location: lower on the base frame.
Safety margin of a design: 30%.
Stationary loading ramp РММ-2-23-40-8-ПГУ-6 consists of inclined part and two horizontal parts located nearby, standing on supporting screw jacks. Dock leveler is integrated in one of horizontal part, which allows load/unload semi-trailers parked for rear unloading. On the frontal part of both horizontal parts, are installed mechanical hinged lips, which allow load/unload of semi trailers parked for lateral unloading. Inclined part connected to a horizontal part using a folding connecting ramp. The construction (all-welded) of the horizontal and hinged parts of stationary loading ramp consists of load-bearing and transverse beams covered with flooring. Entrance and hinged lips are made of corrugated hot-rolled sheet. The flooring is made of expanded metal sheet. On the sides of the construction are removable safety fences. Working stroke of stationary loading ramp is 1000 - 1500mm.
In a horizontal part is built dock leveler 1800x2000 mm with a loading capacity of 6 tons. Dock leveler is controlled using the remote control, which significantly reduces the time, spent on the forklift driver.
Dock leveler with a hinged lip is installed in a horizontal part, and covers the space between truck and stationary loading ramp, accelerating the process of loading and unloading goods. It is a hydraulic device with a movable upper part, consisting of a base frame, a platform and a hinged lip. The platform through the hinge is attached to the base frame of dock leveler, and a hinged lip is attached to the platform from the front side through the hinge. Under the platform there is an electro-hydraulic oil station consisting of a hydraulic station and hydraulic cylinders, by means of which leveling platform is upping and the hinged lip is opened.